Grundig 40VLE630BH, Service Manual

Page: 22 / 180

TP CHASSIS / TELEVISION
22 September 2011
5. USING NEW PRODUCT FEATURES
5.1. Digital Satellite Settings and Setup (DVB-S2)
There are two ways of setting the digital satellite channels: The first simple setup and
the other is advanced setup.
5.1.1. Easy Installation
All antenna settings are preconfigured for Turksat 42° East satellite stations.
1.In Source Setup menu, Connection Type tab, select Satellite with .
2.Use to select Easy Installation and press OK.
3. Press ● (Green) button to start searching. Search Results menu appears and the
search for TV stations begins. Search may take several minutes depending on the
number of television stations received. The search ends when the PROGRAMME
TABLE appears.
5.1.2. Advanced Installation
if you want to receive the stations from a
different satellite, you must configure the
antenna settings (satellite, LNB Type,
DISEqC Mode, LNB selection) for the
desired satellite.
1. In Source Setup menu, Connection type
tab, select Satellite with .
2. Select Advanced Installation with
and press OK. ANTENNA SETTINGS menu
will be displayed.
3. Select Auto Tuning with and press
OK. Select the satellite with and
, and press OK. The value in
Transponder tab is not required for auto
tuning.
4. Select LNB Power tab with . Depending on the LNB type, set LNB power to
13/18V or 14/19V with .
5. Select LNB Type with and press OK. Select the LNB type used in the
satellite system with . Press ● (Green) to store the selection or ● (Red) to
cancel it.
6. Select DISEqC Mode with . Based on the number of current satellite
systems, select DISEqC 1.0 or DISEqC 1.1 with
.
DISEqC 1.0 allows for