Grundfos DME 150 AP Installation And Operating Instructions Manual Download Page 20

Page: 20 / 44

5.7 Fieldbus communication

The pump can be configured for fieldbus applications
(Profibus). Apart from the usual installation and
operating instructions, Profibus pumps are supplied
with a special Profibus installation and operating
instructions.

5.8 Menu

The pump features a user-friendly menu which is

activated by pressing the

button. During start-up,

all texts will appear in English language. To select
language, see section Language.
All menu items are described in the following

sections. When

appears at a menu item, it means

that this item is activated. By selecting "RETURN"
anywhere in the menu structure, you will return to the
operating display without changes.

TM077994

* "NUMBER" applies only to versions with Profibus.

Related information

5.10 Manual
5.11 Pulse
5.12 Analog
5.13 Timer
5.14 Batch
5.15 Anti-cavitation
5.16 Capacity limitation
5.17 Counters
5.18 Resetting
5.19 Return
5.20 Language
5.21 Input setup
5.22 Empty tank (alarm)
5.23 Measuring units
5.25 Control panel lock
7. Calibration

5.9 Operating modes

Note

The displayed l and ml values are only
reliable if the pump has been calibrated to
the actual installation, see
section Calibration

The pump can run in five different operating modes:
•

Manual

•

Pulse

•

Analog

•

Timer

(internal batch control)

•

Batch

(external batch control)

See description in the following sections.

Related information

7. Calibration

English (GB)

Summary of Contents for DME 150 AP













































Search results

Summary of Contents for DME 150 AP

Reviews:

Related manuals for DME 150 AP

Brands by name

Popular brands

Grundfos DME 150 AP, Installation And Operating Instructions Manual

Search results

Summary of Contents for DME 150 AP

Reviews:

Related manuals for DME 150 AP

Brands by name

Popular brands