
page 6
Remark
Attention
!
General safety information
Basic information, which must be followed during service, operation and maintenance, are listed as follows.
It is absolutely essential to read the operator’s manual / user guide by respective technical staff / technical operator before
installation and start up.
In addition to this, it must be permanently available at the site.
IMPORTANT
Please pay attention, not only to the safety instructions under this main point, but also to those special security cautions that
are mentioned on the other pages.
This symbol warns of electrical voltage.
Safety instructions which, if not complied with, may endanger persons, are marked specifically with
the general hazard symbol.
This heading is used if inaccurate compliance or non-compliance with the operating Instructions or
specified work procedures etc. may result in damage.
Points out special information.
Notes attached directly on the machine, must be strictly followed and maintained in completely readable
condition!
Qualification and training of the personnel
The operation, maintenance, service and installation personnel must have appropriate qualifications for this
work. Responsibility and supervision of the personnel must be clearly defined by the end user / operator. If
the personnel do not have the necessary knowledge, they must be trained and instructed. The operator must
ensure that the personnel have completely understood the contents of the user information.
Non-observance of the safety information can be dangerous
Not observing the safety information can lead to danger for people, environment and machines.
Not observing the safety information can mean the loss of any or all damage claims. In special cases, non-
observance can, for example, lead to the following dangers:
Failure of important plant functions.
Failure of prescribed methods of maintenance and preventive maintenance.
Endangering people due to electrical, mechanical and chemical effects.
Endangering the environment due to leaks of dangerous materials.
Summary of Contents for Lubricus LUB-C-1
Page 10: ...page 10 Adjustment Flow chart...