page 25
Recommened tube length
Keep in mind:
- For low temperature
- For stiff grease, more than NLGI 2
- For difficult applications with high backpressure
Shorten your tube as much as possible
Minimum inner diameter is 4mm Ø
Avoid reductions of the inner tube
Chart: Required pressure vs. to tube length (tested with tubes 6 x 4 mm)
Disposal
When disposing lubricant the waste disposal instructions of the lubricant manufacturer must
be observed!
Disposal of Lubricus Lubrication System: observe the regional valid laws and regulations.
The empty lubricant cartridges contain lubricant remains!
Please dispose with other oil contaminated garbage!
Gruetzner GmbH
Kohlenhofstr. 60
D-90443 Nürnberg
www.lubricus.com
Tel.: +49-911-277 399 0
Fax: +49-911-277 399 99
Remark!
Summary of Contents for Lubricus LUB-C-1
Page 10: ...page 10 Adjustment Flow chart...
