Gruetzner Lubricus LUB-C-1, User Manual

Page: 5 / 25

page 5
Attention
!
General safety details
Everybody who is involved with the installation, start-up, maintenance and operation of the Lubricus Lubrication System
must read these instructions carefully!
Use in accordance with guide
Lubricus Lubrication System is only allowed for industrial use .
Lubricus Lubrication System may only be put into service, if it is integrated or attached to another
machine and will be operated together with that machine.
Lubricus Lubrication System may only be used according to the technical data (see chapter
“technical data”).
Unauthorized structural changes at the Lubricus Lubrication System are not permitted . We do
not assume liability for damages of persons or machines which result from that.
Other uses or uses beyond those described above cannot be considered to be in
accordance with the regulations.
Extent of warranty
Warranties concerning operating safety, reliability and capacity, are only granted under the following conditions:
Assembly, installation, maintenance and repair are only carried out through trained specialist. Hazardous hot or cold
machine parts must be shielded to prevent touching.
Lubricus Lubrication System must be used according to the instructions in the technical operating manual
- the rated technical data must not be exceeded in any case.
- Retrofitting and repair work on the Lubricus Lubrication System may only be done by manufacturer.
Liability and extent of guarantee
Proper functioning of the Lubricus Lubrication System can only be achieved through use of recommended lubricants from the
original Lubricus range of accessories , and by observation of all installation, operation and maintenance instructions.
Grützner GmbH excludes all liability if these instructions are not observed.
Grützner GmbH grants guarantees concerning operating safety, reliability and performance only under the following
conditions:

assembly, installation, maintenance and repairs are carried out by qualified staff only;

hazardous hot or cold machine parts must be shielded to prevent skin contact;

the Lubricus Lubrication System must be used according to the Technical Data and instructions;

the limit values stated in the Technical Data are under no circumstances to be exceeded;

retrofitting and repair work on the Lubricus Lubrication System may only be carried out by the manufacturer;

the lubrication system must be protected against damp and wet.
If a lubricant that has not yet been tested for compatibility with the Lubricus Lubrication System be supplied or requested for
use in the Lubricus Lubrication System by the purchaser/customer, the purchaser/customer undertakes the risk and
responsibility.
This product is subject to strict production controls and fulfils our company’s factory specifications. However, guarantee of
testing of each individual case cannot be given due to the numerous factors involved.
We therefore strongly recommend that test runs be carried out.
All liability is excluded.
The Lubricus Lubrication System lubricant cartridge has been constructed and produced for
one-time use only. Multiple use
of the lubricant cartridge is not envisaged. After being used once, the lubricant cartridge is to be completely replaced; refilling
is not permitted. Noncompliance will lead to nullification of the guarantee.
For guarantee conditions see the sales and delivery conditions of Grützner GmbH
Attention
!