27
Revision date: 08.30.18
106205_06_07_08
1. Continue installing panels and aluminum profile in locations shown on end panel diagrams (Quick Start section) for front and back end walls. End wall
with door shown below.
END PANEL INSTALLATION (continued)
ATTENTION:
Install 104213 U-channel along panel edges shown above (dashed line). Panel edges adjacent to door are capped with 104213 U-channel
and then tucked behind door channel when possible. Bottom edge of panel above door is capped with 104548 end cap.
2. After installing all end panels, continue with
Guide #2
.
Install End Wall Cladding
Install U-channel here.
Install U-channel here.
ATTENTION:
Remember to cut outer end panels to
match roof and sidewall panel profile. DO NOT CUT
END PANELS TO MATCH END RAFTER PROFILE!
See assembly Guide #2 for additional details.
H-Channel
104548
