6
106205_06_07_08
Revision date: 08.30.18
Install H-Channel — End Walls
The H-channel (113236Z096) design requires installation of the flat side facing out with channel side toward the frame. Some dia
-
grams and photos in this document may show installation of H-channel with channel side facing out. Design of the new H-channel
does not allow
channel-side out installation.
Use the diagrams on this page to install H-channel with flat side facing out.
ATTENTION:
Use only 1-1/2" Tek screws (FA4484B) to attach H-channel to building frame.
Do not use the shorter 1" Tek
screws. They will not hold. Do not use washers on Tek screws when installing H-channel. See diagrams below.
ATTENTION:
Install all twin-wall poly carbonate panels with UV-protected side toward the sun.
UV-protected side
toward sun.
Install 1-1/2" Tek screws (FA4484B)
through H-channel into building frame.
H-Channel
Center Groove
Flat side toward the sun.
Flat
Side
Channel
