23
Revision date: 08.30.18
106205_06_07_08
Install End Wall Frame — General Notes
INSTALL FRAMING FOR ACCESSORIES (OPTIONAL)
Complete these steps to install accessory framing:
1. Read note regarding installation of optional accessories near beginning
of end wall installation section.
2. Based on installation requirements and precautions of the accessory,
choose a location in the end wall where you can mount the accessory.
3. Cut two (2) 1.5" x 1.5" frame tubes to required length.
4. Attach these horizontal frame tubes between the vertical frame tubes
using QH1330 brackets. See below.
ATTENTION:
Dashed lines show where additional frame tubes are
installed. If you are not installing any accessories, the accessory framing
is not needed.
