7.3 Manage Active and Reactive Power Simultaneously
If active power and reactive power need to be managed at the same time, connect
the Shine Pano with two ripple control receivers as below.
1
5
7
9
11
3
40
7.4 PV Power Station Solution
In PV power station, there are more than one Pano. You can choose one Pano as the
host connecting to the ripple control receiver. The host Pano could send commands
to other Panos (slave Pano) by the local network.
Normally, ripple control receiver would send commands to the host Pano if power
management is required. The host Pano would operate the inverters connected to
itself, meanwhile, it would send commands to salve Panos, which could operate
other inverters.
Summary of Contents for Shine Pano
Page 1: ...Shine Pano...
Page 44: ...41...
