Growatt Shine Pano, User Manual

Page: 28 / 51

2. Environmental monitor
Addren: Set the communication address of ambient sensors, range 1~255
Click “36” using finger or the stylus to select the communication address of ambient
sensor, 36 is default value. Select “ON” or “OFF” to open or close the communication
address of ambient sensors.
3. Ammeter
Addren: Set the communication address of ammeter, range 1~255.
Click “37” using finger or the stylus to select the communication address of ammeter,
37 is default value. Select “ON” or “OFF” to open or close the communication address
of ammeter.
4. Power adjust
Select “ON” or “OFF” to open or close the function of power adjustment.
Select Host or Slave to specify Shine Pano as host or slave devices during power
adjustment.
Once finished all the setting of ammeter, ambient sensor and power adjust, click “OK”
button at bottom and click “Yes” in prompt window then finish setting.
5.5 About Interface
About interface is shown as following figure.
25