Growatt Shine Pano, User Manual

Page: 20 / 51

17
2. When communicating with wireless ZigBee, please set the Address Range as
before, at the same time, you should set the wireless module ID and channel. After all
the setting, reset the wireless module. Then you can set the IP Address of Shine Pano,
including the Local IP and Server IP or domain name. When the server has both IP and
domain name, the IP access would be prior. Details please refer to ZigBee Module
User Manual.
4.3 Environment Monitor, Smart Meter, Power Reducer Setting
1. Environment monitor setting. Fill in the address of environment monitor in
and choose “ON” in the drop-down menu.
2. Smart meter setting. Fill in the address of smart meter in Addren and choose “ON”
in the drop-down menu.
3. Power reducer setting. You can set “ON” and “OFF” in the drop-down menu of
Power Adjust. When it is “ON”, it means the power reducer is operating, when it is
“OFF”, it means the power reducer is closed. And there is a “Host” and “Slave” in
the second drop-down menu. When it is “Host”, it means Shine Pano is master
machine, when it is “Slave”, it means Shine Pano is slave machine.
After finishing all the settings, click “OK” on the right lower. Then click “Yes” and
get access to the new interface.
Addren