16
If the dialog box below appears, the address setting is successfully finished.
2. When communicating with wireless ZigBee, you have to do the inverter address
setting as before. After address setting, you should set the wireless ID and channel in
“Extra” and finish the related setting. Please reset the wireless module after all the
setting. For more details, please refer to ZigBee Module User Manual.
4.2 Shine Pano Setting as an Intermediate Device
1. When communicating with RS485, please set the Address Range in System Set and
set the inverter address within the address range. Then set the IP address of Shine
Pano, including the Local IP and Server IP or domain name. When the server has both
IP and domain name, the IP access would be prior.
Summary of Contents for Shine Pano
Page 1: ...Shine Pano...
Page 44: ...41...
