13
3.3 Connection with PV Devices
Shine Pano can communicate with devices like inverters, environment monitors,
smart meters etc.
3.3.1 RS485 Wire Connection
1. To set up RS485 wire communication, please notice the identification number of
portal RS485 of inverters. 2# of RS485 corresponds with 2# of Pano COM, 1# of
RS485 corresponds with 4# of Pano COM as following figure.
2. Inverters can connect one by one in series by RS485, and then connect the last
inverter to the Shine Pano.
3. The connection with smart meters and environment monitors is similar with the
way with inverters. To monitor the environment monitors, you can just connect the
environment monitor to the inverter. With regard to the smart meter, you can
connect the communication cable to the COM portal of Pano.
Notice:
ones designated by Growatt. Otherwise, connection could possibly fail.
The manufacturers of environment monitors and smart meters must be the
Shine Pano COM port
Inverter RS485 port
Note:
the position of the numeral marks may be reversed, please refer to the actual product, and
connect the Pano and inverter according to the numeral marks.
Summary of Contents for Shine Pano
Page 1: ...Shine Pano...
Page 44: ...41...
