Grizzly G0887, Owner'S Manual, Page: 77 / 108

Model G0887 (Mfd. Since 01/19)
-75-
Pulley
Deflection
Pulley
Figure 121.
Checking belt tension.
1
⁄
4
"
5. Adjust motor until there is
1
⁄
4
" belt deflection
when pressed in center with moderate pres-
sure (see
Figure 121).
6. Tighten (4) motor hex bolts to secure tension.
7. Install outer pulley cover.
Tensioning Belt
Drive belt should have a
1
⁄
4
" of belt deflection.
To tension belt:
1. DISCONNECT MACHINE FROM POWER!
2. Remove (5) button head cap screws and flat
washers to remove outer pulley cover (see
Figure 119).
Figure 119. Outer pulley cover and securing
button head cap screws.
x 5
Outer
Pulley Cover
3. Adjust blade speed dial to maximum speed
setting.
4. While an assistant holds motor, loosen (4)
motor hex bolts (see
Figure 120).
Figure 120. Motor mounting bolts location.
x 4