Grizzly G0887, Owner'S Manual, Page: 67 / 108

Model G0887 (Mfd. Since 01/19)
-65-
To reduce risk of shock or
accidental startup, always
disconnect machine from
power before adjustments,
maintenance, or service.
Adjusting Blade
Brush
The Model G0887 has a blade brush to help keep
metal chips off the blade wheels. It will wear over
time and require re-adjustment when it no longer
makes proper contact with the blade. Eventually
the brush will require replacement. This is con-
sidered a normal wear item and is not covered by
warranty.
Item(s) Needed Qty
Hex Wrench 4mm .............................................. 1
To adjust blade brush:
1. DISCONNECT MACHINE FROM POWER!
2. Open wheel cover by removing (4) button
head cap screws (see
Figure 94).
Figure 94. Wheel cover secure screw locations
(2 of 4 shown).
3. Loosen wing nut on blade brush adjustment
bracket (see Figure 95).
4. Adjust blade brush and cover so blade
extends approximately
1
⁄
8
" into bristles of
brush, then tighten wing nut (see Figure 95).
Hole in bracket is slotted for easy adjustment.
Figure 95. Blade brush adjustment components.
Blade
Blade Brush
Wing Nut
Blade Brush
Cover