Grizzly G0820, Owner'S Manual, Page: 70 / 104

-68-
Model G0820 (Mfd. Since 12/16)
SECTION 7: MAINTENANCE
To reduce risk of shock or
accidental startup, always
disconnect machine from
power before adjustments,
maintenance, or service.
Cleaning the Model G0820 is relatively easy.
Vacuum excess wood chips and sawdust, and
wipe off the remaining dust with a dry cloth. If any
resin has built up, use a resin-dissolving cleaner
to remove it.
Protect the unpainted cast-iron table by wiping
it clean after every use—this ensures moisture
from wood dust does not remain on bare metal
surfaces. Keep the table rust-free with regular
applications of products like G96
®
Gun Treatment,
SLIPIT
®
, or Boeshield
®
T-9 (see Figure 144 for
more details).
Cleaning &
Protecting
For optimum performance from your machine,
follow this maintenance schedule and refer to any
specific instructions given in this section.
Daily Check:
•
Loose mounting bolts.
• Damaged saw blade.
• Worn or damaged wires.
• Any other unsafe condition.
Weekly Maintenance:
•
Clean sliding table surface and grooves.
• Clean and protect cast iron-table.
• Clean rip fence and slide ways.
Monthly Maintenance:
•
Clean/vacuum dust buildup from inside cabi-
net and off motors.
• Check/replace belts for proper tension, dam-
age or wear (
Page 73).
Every 6–12 Months:
•
Lubricate trunnions (
Page 69).
• Lubricate leadscrews ( Page 70).
• Lubricate sliding table ways (
Page 70).
Schedule
G5562—SLIPIT
®
1 Qt. Gel
G5563—SLIPIT
®
12 Oz. Spray
G2871—Boeshield
®
T-9 12 Oz. Spray
G2870—Boeshield
®
T-9 4 Oz. Spray
H3788—G96
®
Gun Treatment 12 Oz. Spray
H3789—G96
®
Gun Treatment 4.5 Oz. Spray
Figure 144. Recommended products for protect-
ing unpainted cast iron/steel parts on machinery.