Grizzly G0820, Owner'S Manual, Page: 39 / 104

Model G0820 (Mfd. Since 12/16)
-37-
15. While staying safely away from blade, try to
start main blade and scoring blade.
— If blades do not start, cabinet door safety
switch safety feature is working correctly.
— If blades do start (with cabinet door open),
immediately turn machine OFF and dis-
connect power. The cabinet door safety
switch safety feature is not working cor-
rectly. This safety feature must work prop-
erly before proceeding with regular opera-
tions. Call Tech Support for help.
16. Close cabinet door, then push Emergency
Stop button.
Congratulations.
Test Run is complete!
14. Open cabinet door shown in Figure 65. This
activates cabinet door safety switch to pre-
vent saw from starting while door is open.
Figure 65. Cabinet door location.
Cabinet
Door
Recommended
Adjustments
The following list of adjustments were performed
at the factory before the machine was shipped:
• Riving Knife Alignment ...................
Page 43
• Aligning Scoring Blade ................... Page 48
• Blade Tilt Calibration .......................
Page 75
• Sliding Table Parallel Adjustment .... Page 76
• Squaring Crosscut Fence to Blade
Page 77
• Calibrating Rip Fence ...................... Page 79
Be aware that machine components can shift
during the shipping process. Pay careful atten-
tion to these adjustments during operation of the
machine. If you find that the adjustments are not
set according to the procedures in this manual or
your personal preferences, re-adjust them.