Grizzly G0820, Owner'S Manual, Page: 21 / 104

Model G0820 (Mfd. Since 12/16)
-19-
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
Inventory
The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
Inventory (Figure 11) Qty
A. Small Extension Table ................................ 1
B. Large Extension Table ............................... 1
C. Crosscut Table ........................................... 1
D. Rip Fence Rail w/Fasteners ....................... 1
E. Crosscut Fence Assembly ......................... 1
F. Rip Fence ................................................... 1
G. Rip Fence Scale ......................................... 1
A B
C
D
E
F
G
Figure 11. G0820 Inventory 1.
H
I
J
K
L
M
N
O
P
Q
R
S
T
U V
W
X
Figure 12. G0820 Inventory 2.
Inventory (Figure 12) Qty
H. Rip Fence Base .......................................... 1
I. Push Handle ............................................... 1
J. Flip Stop ..................................................... 1
K. Push Stick .................................................. 1
L. Edge Shoe Assembly ................................. 1
M. Hold-Down Assembly ................................. 1
N. Splitter/Riving Knife .................................... 1
O. Blade Guard ............................................... 1
P. Riving Knife (Toolbox) ................................ 1
Q. End Plate .................................................... 1
R. End Cover ................................................... 1
S. End Cap ..................................................... 1
T. Arbor Wrench (Toolbox) ............................. 1
U. Combo Wrench 17/19mm (Toolbox) ........... 2
V. Combo Wrench 30mm (Toolbox) ............... 2
W. T-Handle Wrench 8mm (Toolbox) .............. 1
X. Toolbox ....................................................... 1