Grizzly G0764, Owner'S Manual, Page: 33 / 124

Model G0764 (Mfd. Since 02/14)
-31-
28. Move sliding table all the way forward to
expose blade cover, then flip cover locks (see
Figure 38) up to open.
Figure 39. Loosening main blade arbor bolt.
Arbor
Bolt
Main Blade
Locking Hole
29. Insert arbor blade locking tool into access
hole shown in Figure 39.
30. Push down on blade locking tool with one
hand as you rotate arbor clockwise with
wrench on arbor bolt. This will force blade
locking tool into arbor indent and prevent
arbor from rotating in next steps.
31. Continue unthreading arbor bolt clockwise (it
has left-hand threads) until you can remove
arbor bolt, arbor bushing, and flange (see
Figure 40).
Figure 38. Location of blade cover locks.
Blade Cover Locks
Figure 40. Main blade arbor parts and tools for
changing blade.
Flange
Arbor
Bolt
Arbor
Bushing
27. Release belt adjustment handle (see Figure
37) and rotate motor adjustment lever clock-
wise to adjust motor and tension belt.
Figure 37. Location of motor adjustment handle
and motor adjustment lever.
Motor Adjustment
Handle
Motor Adjustment
Lever
Before proceeding with the next steps, wear
gloves to protect your hands when handling
and installing the blade.
The Model G0764 does not ship with a 14"
main blade. Refer to Blade Requirements
and Blade Selection beginning on Page 46
when purchasing the main blade.
32. Slide main blade (not included) over arbor
with teeth facing to the right, then install
flange.