Grizzly G0764, Owner'S Manual, Page: 23 / 124

Model G0764 (Mfd. Since 02/14)
-21-
Inventory (Figure 10) Qty
J. Rip Fence Body Assembly ......................... 1
K. Push Handle ............................................... 1
L. Crosscut Fence Flip Stops ......................... 2
M. Edge Shoe Assembly ................................. 1
N. Push Stick .................................................. 1
O. Riving Knife ................................................ 1
P. Hold-Down Assembly ................................ 1
Q. Blade Guard Cover Assembly .................... 1
R. Blade Guard Arm Brace ............................. 1
S. Blade Guard Cover Bracket ....................... 1
T. Blade Guard Arm (Lower Section) ............. 1
U. Blade Guard Arm (Upper Section) ............. 1
V. End Plate w/Handle (Sliding Table) ............ 1
W. Blade Guard Arm (Middle Section) ............ 1
X. End Plate (Sliding Table) ............................ 1
Figure 10. G0764 Inventory 2.
Inventory
Inventory (Figure 9) Qty
A. Small Extension Table ................................ 1
B. Large Extension Table ............................... 1
C. Crosscut Table ........................................... 1
D. Crosscut Fence .......................................... 1
E. Crosscut Table Brace ................................. 1
F. Rip Fence Rail w/Fasteners ....................... 1
G. Rip Fence Scale ......................................... 1
H. Rip Fence ................................................... 1
I. Cabinet Door .............................................. 1
Figure 9. G0764 Inventory 1.
These are the “loose” components shipped with
the machine. Before setup, lay them out to make
sure you have everything listed below.
If any non-proprietary parts are missing (e.g. a
nut, bolt, or washer), we will gladly ship them upon
verification of order. For the sake of expediency,
you can also get replacement parts at your local
hardware store.
A
B
C
D
E
F
G
H
I
J
L
K
M
N
O
P
Q
R
S
T
V
U
W
X