Griesser 179086, Operating Instructions Manual

Page: 11 / 24

18 | EN
EN | 19
Example 1 of a display in the operating mode
1 Channel number/group number
2 Toolbar
3 Display of product
4 Movement
5 Auto/Manual operating mode
6 Left selection key
7 Right selection key
Fig. 1 Display in operating mode (example 1):
Channel 12, programmed venetian blind,
automatic active, movement up
Example 2 of a display in the operating mode
Text fi eld 1 (living room)
Text fi eld 2 (right)
Product fi eld
Operating mode fi eld
Position fi eld
Fig. 2 Display in operating mode (example 2):
Channel 12, programmed venetian blind,
stop status, manual active;
Text
fi eld 1 (living room) and
text fi eld 2 (right) individually entered
A group pictogram is shown for a group channel and for
the master channel (combination of all channels, "All").
A channel or group number is not displayed in the master
channel.
Important:
If there are different products in a single channel after
programming, the product pictogram is shown with
an additional reference to different products (product
combination).
This is applicable only if "INTERNAL" is selected in the
Settings - Product Selection menu, because only in this
case is the product type returned by the programmed
receiver displayed.
4.4.1 Icons in the device display
Pictograms in the toolbar
Battery indicator
(low battery capacity)
Tab. 3 Pictograms in the toolbar of the display
Icons in the product fi eld
Roller shutter
Interior shading