Griesser 179086, Operating Instructions Manual

Page: 23 / 24

42 | EN
EN | 43
6 Troubleshooting
Fault Cause Remedy
Drive does
not run; status
display does
not light up Batteries are low
Batteries are
incorrectly
installed
Insert new
batteries
Insert batteries
correctly
Drive does
not run; status
display lights up
red or
fl ashes
orange
1. The receiver
is outside of
sending range
2. Receiver out of
order or faulty
3. Receiver
not yet
programmed
1. Reduce
distance to
the receiver
2. Switch on or
exchange
receiver
3. Program
receiver
Desired drive
does not run Incorrect group
or channel
selected Select correct
group or channel
End positions
are approached
inaccurately End positions
not yet set Have the end
positions set
by a trained
specialist in
accordance
with the product
instructions
Drive operates
in the wrong
direction Directions
are incorrectly
allocated Delete
transmitter and
reprogram
Tab. 12 Troubleshooting the Progreso 15M
7 Repair
Please contact your dealer if you have any questions.
Please always provide the following information:
• Item number
and name on the type plate
• Type of fault
• Previously occurring and
unusual incidents
• Accompanying conditions
• Own presumption
8 Address
Griesser AG
Tänikonerstr. 3
CH-8355 Aadorf
Tel +41 58 822 42 42
Fax +41 58 822 43 43
www.griessergroup.com
9 Disposal
The current applicable international, national and regional
laws and regulations must be observed for disposal of the
device.
Ensure that materials and assemblies are recycled,
disassembled and separated to prevent environmental and
health hazards during recycling and disposal.
Material groups such as plastics and metals of various
types must be sorted for recycling and disposal.
Disposal of electrical and electronic components :
Electrical and electronic components must be disposed
of in accordance with the applicable laws and national
regulations.