Griesser 179086 Operating Instructions Manual Download Page 16

28 | EN 

 

 

  

EN | 29 

"Channels" submenu

 

A selected channel can be allocated to one or more groups. 
A name for the selected channel can be de

fi

 ned in two text 

fi

 elds each with a maximum of 15 characters. 

"Groups" submenu

 

Individual channels (maximum 5 channels per group) 
can be allocated for 

fi

 ve selectable groups. A name for 

the selected group can be de

fi

 ned in two text 

fi

 elds each 

with a maximum of 15 characters

Important:

The group allocation is only available if at least two 
programmed individual channels are available. 

"All" submenu

 

A name for the master channel can be de

fi

 ned in two text 

fi

 elds each with a maximum of 15 characters. This submenu 

is not available in the event of cut-out in "Menu: Function - 
Expert". 

"Reset" submenu

 

Resets all group allocations and text 

fi

 elds: All names and 

allocations can be reset to the factory settings by selecting 
the "Rest" menu. 

4.5.2 "Settings" 

menu 

You can make various function settings in the

 

"Settings" 

menu. 

"Language" submenu

 

A language for the menu texts can be selected from the list. 

Display languages in the Progreso 15M display 

German English  French 

Italian Spanish 

Portuguese 

Dutch Swedish 

Danish 

Polish Hungarian 

Czech 

Slovenian Turkish 

 

Tab. 9  Available languages in Progreso 15M 

•  "Save" menu key 

(Display) "Lighting" submenu 

You can switch the display backlighting on or off. 
The backlighting automatically switches off after 10 seconds 
if a key is not pressed. The lighting is enabled in the factory 
setting. 

"Channel settings" submenu 
"Group" submenu 
"All" submenu (with activated function only) 

The above three submenus ("Channel Settings", "Group", 
"All") branch further into three submenus 
• "Product selection" 
• “Intermediate position” 
• "Ventilation/tilting position"

Product selection

 (for channels only) 

Regardless of products previously de

fi

 ned during 

programming (INTERNAL setting), the product view can 
be rede

fi

 ned individually for the channel with the assigned 

pictogram. 
•  "Save" menu key 

Summary of Contents for 179086

























Reviews: