Flush Mode (Buffer Flushing)
Using this parameter, you can control line handling and network buffers with connection startup
and disconnect. The default setting is
00
.\
FlushMode (00) ? _
You can also select between two different packing algorithms.
All bit positions in the table
that are blank represent “don’t care” bits for that particular
option, which can be set to either a 0 or 1 value.
Figure 8-12
Flush Mode Options
Function
7
6
5
4
3 2 1
0
Input Buffer (Serial to Network)
Clear with a connection initiated from the device to the network
1
Clear with a connection initiated from the network to the device
1
Clear when the network connection to or from the device is disconnected
1
Output Buffer (Network to Serial)
Clear with a connection initiated from the device to the network
1
Clear with a connection initiated from the network to the device
1
Clear when the network connection to or from the device is disconnected
1
Alternate Packing Algorithm (Pack Control)
Enable
1
Summary of Contents for NetDirect
Page 1: ...NetDirect User Guide ...
