Application Specification
1
of 11
© 2020 TE Connectivity family of companies
All Rights Reserved
*Trademark
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners.
PRODUCT INFORMATION 1-800-522-6752
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at
114-151049
13 NOV 2020
Rev A
NOTE
All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and inches]. Unless
otherwise specified, dimensions have a tolerance of ±0.13 [±.005] and angles have a tolerance of ±2°. Figures and illustrations are
for identification only and are not drawn to scale.
1.
INTRODUCTION
This specification covers the requirements for application of DEUTSCH DRC16 header connector to be
mounted on a printed circuit board (PCB). The header is offered in 24, 40-pin arrangements which will
mate to the DEUTSCH DRC16 plug connector and comes in Right Angle and Straight versions.
The header receptacle consist of a housing, molded-in pins, pin spacer, flange seal and threaded
inserts. The header features a center threaded coupling system. Basic terms and features of this product
are provided below.
DEUTSCH* DRC16 Header Connector System
Standard Features All Arrangements
(DRC13-24PA shown as example)
Mating Side
Housing
Seal Surface
Flange Seal
Keyway 2X
Threaded Insert
Pin Spacer
Molded-in Pins
PCB Side
Standard Features All Arrangements
(DRC10-24P shown as example)
Threaded Insert
Housing
Pin Seal
Mating Side
PCB Side
Molded-in
Solder Pots
Flange Seal
Sold Separately
Molded-in Pins
