L
ittfinski
D
aten
T
echnik (
LDT
)
Operation Instruction
Connection Cable (1m)
for the 5-poles Boosterbus
from the
Digital-Professional-Series
!
Kabel Booster 1m
Part No.:
000123
Twisted and interference protected for the
connection of Digital Command Stations (e.g.
Märklin Control Unit
,
Central Station
1
and
2
,
DiCoStation
and
KeyCom
as well as
Intellibox
,
TWIN-CENTER
,
EasyControl
,
ECoS 1
and
2
,
Commander
) with Boosters
(e.g.
6015 / 6017, Power 3, TWIN-BOOSTER,
DB-2
and
DB-4
) and for the connection of
Boosters to each other.
This product is not a toy! Not suitable for children under 14 years of age! The kit
contains small parts, which should be kept away from children under 3 years of
age! Improper use will imply danger of injuring due to sharp edges and tips!
Please store this instruction carefully
.
CE Part-No.:
1370366
Introduction / Safety Information:
You have purchased the connection cable
Kabel Booster 1m
for the
5-poles Boosterbus
for your digital model railway.
The connection cable is a high quality product which is supplied
within the assortment of
L
ittfinski
D
aten
T
echnik (
LDT
).
We are wishing you having a good time using this product.
The connection cable comes with
24 month warranty
.
•
Please read the following instructions carefully. Warranty will
expire due to damages caused by disregarding the operating
instructions.
LDT
will also not be liable for any consequential
damage caused by improper use or installation.
•
Attention: Please switch off your model railway by
disconnecting the transformers from AC-current before
starting any installation.
Connecting the Kabel Booster 1m:
The connection cable
Kabel Booster 1m
consists of a 1 meter
twisted
bus cable with two
original connectors
such as used
on several digital components supporting the
5-poles
boosterbus
(e.g.
Digital Command Stations
Märklin Control
Unit
,
Central Station
1
and
2
,
DiCoStation
and
KeyCom
as
well as
Intellibox
,
TWIN-CENTER
,
EasyControl
,
ECoS 1
and
2
,
Commander
and
Booster
6015 / 6017, Power 3, TWIN-
BOOSTER, DB-2
and
DB-4
).
1 m
weiss
white
weiss
white
The
first Booster
has to be always
directly
connected with the
5-poles booster-bus cable
Kabel Booster 1m
to the
Digital
Command Station.
The
second Booster
shall be connected to the
first etc
.
If you want to create a
connection
to the
DigitalBooster DB-2
or
DB-4
you have to plug one connector of the
Kabel Booster
1m
to the digital command station or to the previous booster.
The position of the inserted plug at the
Control Unit
,
Intellibox
,
TWIN-CENTER
,
EasyControl
,
Commander
,
Märklin Booster
6017
,
Power 2
and
Power 3
is correct if the
cable shows
to
the
bottom
. At the
Märklin Booster 6015
the
Kabel Booster
1m
has to show
to the top
.
The
booster-bus socket
of the
Central Station 2
is located at
the
underside
of the Digital Command Station.
The Digital Command Stations
Central Station 1
and
ECoS 1
and
2
contain a
plug-in connection clamp
for the
5-poles
booster-bus connection
.
For those and other digital command stations you can find
colored samples at the Internet on our Web-Site (
www.ldt-
infocenter.com
) within the section “
Sample Connections
” to
show you the correct connection of the
Kabel Booster 1m
.
At the
DigitalBooster DB-2
and
DB-4
connect the
second plug of the
Kabel
Booster 1m
onto
the
pinbar ST1
which is
marked with “
IN
”.
Please take care that the
white single wire
of the
Kabel Booster 1m
corresponds
to the
white
marking
at the
pinbar ST1
.
The plug of the 5-poles
booster bus cable has been
correct attached onto the
DigitalBooster DB-2
or
DB-4
if the twisted cable
shows
away from
the
booster
.
K
KL2
16...18V~
Littfinski DatenTechnik (LDT)
J
LED1
+
red brown
brown
yellow
OUT
IN
ST1
ST2
DB-2
Rev. 2.4
KK1
MF1
KL1
L
ittfinski
D
aten
T
echnik (
LDT
)
D-25492 Heist
www.ldt-infocenter.com
Digital-Profi werden!
2,5 Ampere Booster für die Digitalformate
Marklin-Motorola, mfx®, M4 und DCC.
DigitalBooster-2
DB-2
Multi-Digital
Vom Modellbahntrafo
From transformer
rot
red
braun
brown
gelb
yellow
braun
brown
Zum nächsten Booster
To next booster
Boosterkabel von
der Zentrale oder vom
vorhergehenden Booster
Boostercable from
command station or from
previous booster
Zum Gleis
To the track
weiss
white
weiss
white
If a following Booster shall be connected to a
DigitalBooster
DB-2
or
DB-4
by use of the
5-polige Boosterbus-Cable
this
has to be done via the
pin-bar ST2
(“
OUT
”).
Zum Gleis
To the track
DB-4
Rev. 1.4
KL3
KL4
KL2
STOP/GO
E
D
C
BU2
BU3
ST2
ST1
IN
OUT
Feedback
A
T
JP5
2,5
4,5
ShortReport
RailCom
Go
Auto
ON
OFF
JP4
JP3
JP2
JP1
MM
DCC
BU1
J
K
Littfinski DatenTechnik (LDT)
+
STOP
GO
LED2
LED1
red brown
S1
+
Digital-Profi werden!
www.ldt-infocenter.com
L
ittfinski
D
aten
T
echnik (
LDT
)
D-25492 Heist
Multi-Digital
DigitalBooster
DB-4
2,5 / 4,5 Ampere Booster für die Digitalformate Märklin-
Motorola, mfx
®
, M4 und DCC.
2,5 / 4,5 ampere booster for Märklin-Motorola, mfx
®
, M4
and DCC.
braun
brown
J
rot
red
K
Vom DB-4-PowerSupply
From DB-4-PowerSupply
weiss
white
Zum nächsten Booster
To next booster
Boosterkabel von
der Zentrale oder vom
vorhergehenden Booster
Boostercable from
command station or from
previous booster
