Autostart
0
1
0
1
Hostlist
0
0
1
0
d) Datagram Type
Directed UDP
1
1
0
0
e) Modem Mode
No Echo
0
0
1
1
Data Echo & Modem Response
(Numeric)
0
1
1
1
1
Data Echo & Modem Response
(Verbose)
0
1
1
1
0
Modem Response Only (Numeric)
0
0
1
1
1
1
Modem Response Only (Verbose)
0
0
1
1
1
0
a) Incoming Connection
Never Accept Incoming
Rejects all external connection attempts.
Accept with active Modem
Control in
Accepts external connection requests only when
Modem Control In
input is asserted. Cannot be used with Modem Mode.
Always Accept
Accepts any incoming connection when a connection is not already
established. Default setting.
b) Response
Character Response
A single character is transmitted to the serial port when there is a change in
connection state:
C
= connected,
D
= disconnected,
N
= host unreachable. The
IP address of the host connecting to the device will be provided when you use
verbose mode.
This option is overridden when the
Active Start Modem Mode
or
Active Start
Host List
is in effect. Default setting is
Nothing (quiet)
.
c) Active Startup
No Active Startup
Does
not
attempt to initiate a connection under any circumstance. Default setting.
With Any Character
Attempts to connect when any character is received from the serial port.
With active Modem
Control in
Attempts to connect when the
Modem Control In
input changes from not
asserted to asserted.
Summary of Contents for NetDirect
Page 1: ...NetDirect User Guide ...
