MicroGuard 510 Upgrade
5
TEST
SET
MAX
14 15
13
16
13. Alarm Cancel – Disables audible alarm. Holding down this key overrides function kickout.
14. Test Button – Press and hold the test button to initiate a system self test and run diagnostics.
15. Input Select – Select and enter calibration information.
16. Operator Alarm/Set – Enables operator alarms. When an alarm has been set, the LED above
this button will illuminate yellow.
m
WArnIng
YOu muST uSE ThE CrAnE SETuP mODE TO COrrECTlY SET ThE SYSTEm FOr PrOPEr
OPErATIOn. ThE SYSTEm SETuP muST mATCh ThE ACTuAl COnFIgurATIOn OF ThE CrAnE
SO ThAT IT WIll InDICATE ThE COrrECT hOOK lOAD AnD lIFTIng CAPACITY OF ThE CrAnE.
Summary of Contents for MicroGuard RCI 510
Page 2: ......
