MicroGuard 510 Upgrade
7
Counterweight
On cranes that have counterweight options the
operator must tell the system which counterweight
is currently fitted. If the counterweight push button is
pressed on a crane that does not have counterweight
options, the message “No Other Counterweight
Options” will appear in the information window.
Outriggers
The operator must tell the system which outrigger
position is in use. These positions range from fully
extended to half extended, or from half-extended to
fully retracted and then back to fully extended. If no
other selections are available, the message, “No Other
Chassis Options” will appear in the information window.
Tires and rigging/Travel
On cranes that have more than one tire option, e.g.
static, creep etc., the operator must select the tire
configuration that corresponds to the tire chart to be
used. If the tire push button is pressed on a crane that
does not have tire options, the message “No Other Tire
Options” will appear in the information display. Refer to
your crane rating manual for details of the options on
your crane.
m
WArnIng
DO nOT PErFOrm CrAnE lIFTIng OPErATIOnS WhIlE ThE rIggIng/TrAVEl mODE IS
SElECTED. All CrAnE COnTrOlS rEmAIn ACTIVE WhIlE ThE rIggIng/TrAVEl mODE IS
SElECTED.
Stowing the Jib
The stowed jib button will select between stowed jib
or no stowed jib. The stowed jib button is also used to
stow the erected jib. For cranes that do not have jib
options, the message “No Other Stowed Jib Options”
will appear in the information window.
TEST
SET
MAX
COUNTERWEIGHT
TEST
SET
MAX
OUTRIGGERS
TEST
SET
MAX
TIRES
TEST
SET
MAX
STOWED JIB
W450520 0
7 2020
Summary of Contents for MicroGuard RCI 510
Page 2: ......
