MicroGuard 510 Upgrade
2
Function Kick-Out
Electrically operated solenoids disconnect the control lever functions for boom hoist lower, telescope
out, and winch up whenever an overload or an ATB condition occurs.
Operator Settable Alarms
These alarms, when properly set by the operator, define the operating range. This is achieved by
means of minimum and maximum angle, maximum height, and/or maximum length. These alarms
can be programmed for each job site and allow the operator to work in a defined area.
Boom Angle Sensor
Boom angle is measured by means of a high accuracy potentiometer/pendulum assembly that is
damped to prevent over swing. It provides a voltage proportional to boom angle. The boom angle
sensor is mounted inside the cable extension reel assembly.
Area Alarm
When set, this alarm permits the operator to define the operating zone by only two set points. The
use of this method of setting results in a greatly enhanced working area, and also clearly defines the
operating zone.
W450520 0
7 2020
Summary of Contents for MicroGuard RCI 510
Page 2: ......
