EVO205D SAFE / SURE-Trak 6. MAINTENANCE
6-5
©GreenMech
Ltd
6-5
03/22
6.8 Radiator
Daily
Check radiator for debris. (fig.6.8)
Lift out guard and clean.
50 hours or weekly
In addition to above, blow out radiator core from back with
suitable airline, lift up front grille and clear from front.
CAUTION! A build up of debris risks overheating of
engine and a risk of fire.
6.9 Drive Belts Chipper Flywheel Drive
Belt Replacement
Remove engine cover.
Chipper Drive
1 Release flywheel drive clutch (See 5.9 and Fig 6.9.1)
2 Remove all belts and discard.
3 Fit new set of belts ensuring they lay snugly in grooves of all
three pulleys.
4 Re-engage drive clutch (5.9)
Check alignment and tension before starting chipper.
6.10 Steam Cleaning
Weekly and every 250 hours or 12 months
1) Check all covers are fitted and closed.
2) Steam clean machine surfaces.
3) Clean electrical components with a damp rag, spray with WD40 and then wipe with dry rag.
CAUTION! Do not steam clean directly on to electrical components, e.g. control boxes.
6.11 Air Cleaner (Under Engine Cover)
Weekly (Refer to engine manual)
1) Remove cover screw or clips (fig 6.11) and release.
2) Slide out element and either blow out with air-line or gently
tap on smooth ground to release debris.
3) Replace cover.
6.12 Electrical Connections
Weekly
Check all wiring loom connections are secure.
CAUTION! Poor connections will affect engine security cut-outs and may prevent starting.
Fig.6.8 Radiator guard
Guard
Fig.6.9 Chipper belt tensioner
Tensioner
Fig 6.11 Air Cleaner
Air Cleaner
