EVO205D SAFE / SURE-Trak 4. MACHINE PREPARATION 4-1
©GreenMech
Ltd
4-1
03/22
4.1 Initial Fuelling and Parking
Fill fuel tank with correct fuel (fig 4.1).
Top up hydraulic tank if necessary, with correct oil. See Section
6.
Tracked Model
Position machine on tracks so that body is level.
4.2 Infeed Chute
1) Release infeed chute catch (fig 4.2), and gently lower
infeed chute flap to work position.
2) Check height of infeed chute for safe working height
(fig 3.4.3)
CAUTION! Infeed chute must not be used at less than 600mm from ground (fig
3.4.3). Adjust drawbar of Road tow models as necessary.
CAUTION! Before travelling, always fold up and secure infeed chute flap.
4.3 Discharge Chute
– Standard (fig. 4.3)
1) Release swivel clamps, point chute in desired direction
away from infeed chute and tighten clamps.
2) Set flap at desired height and tighten clamp.
CAUTION! Do not point discharge chute towards infeed
area. (See Fig 4.5)
Fig 4.1 Fuel tank
Fuel Filler
Fig 4.2 Infeed Chute Catch
Infeed catch
Fig 4.3 Discharge Chute
Flap clamp
Swivel
clamps
