Pellet burner GP xx sc 5
2. DESCRIPTION AND ADVANTAGES OF THE AUTOMATED PELLET BURNER
FROM SERIES “GP xx sc”.
The automated modulating pellet burner from series “GP xx sc” utilizing wood pellets is
designated for mounting to hot water boilers and other appliances. The burner utilizes wood
pellets and other types of biomass, which are described below, as the generated heat energy
is adopted by the boiler body’s heat exchanging surfaces, to which it is mounted or by other
heat energy consuming appliances.
The pellet burner from series “GP xx sc” delivery kit consists of:
Main module – 1pc;
Fuel transport auger – 1pc;
Flexible pipe – 1pc, with locking brackets – 2 pcs;
A pair of working gloves – 1pc;
Manual for operation – 1pc;
Main module package – 1pc;
Fuel transport auger package – 1pc;
Manual for installation, operation and maintenance of a pellet burner from series
“GP xx sc” – 1pc.
The automated pellet burner from series “GP xx sc” can utilize the following fuel types:
Wood pellets with diameter Ø 6-8mm, from categories ENplus-A1, ENplus-A2 and
ENplus-B according to standard EN 14961-2:2010, or categories A, AB, B, BC, C,
CD, E, EF according to the manufacture company’s classification;
Dried nuts (from cherries, from morello);
Mixture of pellets and nuts (for example in 50% - 50% ratio);
Other biomass with pellet shape, but after approval test in the burner manufacture
company’s laboratory.
The pellet burner from series “GP xx sc” is equipped with:
Microprocessor controller managing the burner’s modules;
Display panel with keyboard, used to manage the burner’s modules;
Fan for fresh firing air supply equipped with Holl sensor, which controls the rotation
frequency;
Electrical heating element used for ignition of the fuel;
Auger for automatic fuel transportation from a hopper to the burner;
Combustion chamber, in which an optimal burning process is realized;
Photic sensor for dynamic control of the burning process;
Reversible temperature sticker for indication of the system’s operation mode and of
the necessity for cleaning of the appliance/chimney, to which it is fixed;
Irreversible temperature sticker for indication of registered overheating of the burner,
used also as precondition to deny a warranty claim.
The pellet burner is equipped with:
System for automatic fuel ignition;
System for automatic feeding of the fuel to the burner’s combustion chamber;
System for automatic cleaning of the combustion chamber
Security system, which blocks the burner in case the fuel feeding inlet pipe has been
overheated, as a result from emergency situations;
Photic sensor for dynamic control of the burning process;
System for modulation of the firing air flow rate during the process of initial fuel
ignition;
System for modulation of its operation mode, providing optimal operation modes and
low fuel consumption;
Availability to perform final combustion followed by blowing, through a defined period
of time, for cleaning purposes and for new automatic restart.
Summary of Contents for GP 18 sc
Page 39: ...Pellet burner GP xx sc 39...