Installation
Page
25
of 82
5.
Installation
5.1 Mechanical
5.1.1 System installation
WARNING/ATTENTION
Faulty operation/system failure hazard
This section provides critical information regarding the installation of
the system and must be read carefully. Incorrect or improper installation
may result in system failure or faulty operation. Failure to comply with the
installation requirements may result in personal injury and/or damage to
equipment and will render the warranty void.
The manufacturer cannot be held liable for damage or injury resulting
from the incorrect or improper installation, maintenance, or misuse of the
equipment.
Keep the equipment safe from exposure to water, dust, and fire. Welding
near the equipment is not recommended but if welding near the equipment
cannot be avoided, make the equipment safe from welding/grinding sparks,
heat, electric current and electromagnetic effects.
Consult all relevant technical documentation to ensure correct installation.
ATTENTION
The following requirements must always be met:
■
Observe and ensure that the installation always complies with system
specifications.
■
Ensure that the requirements on the installation layout drawing in the
technical documentation are followed. We recommend installing a
drainpipe below the system to collect water drained from the system.
■
The equipment must be installed in an area protected from direct contact
with water or oil. High levels of moisture should also be avoided.
■
Make sure to remove plugs and flange protection that were to protect the
system during transport.
■
The pipework must include means of isolation e.g. shut off valves.
■
The pipework must be properly aligned with the cabinet connection points
to avoid stress on the connection points.
■
Cabinet dimensions are stated in the installation layout. Cabinets can be
