Gree GMV-N07G/A3A-D(U), Service Manual

Page: 126 / 192

Multi Variable Air Conditioners Indoor Unit for North America
120
5. Connect the
drainage duct and
screw the new
pump.
1. Screw the outlet pipe
2. Screw the pump
●Connect the drainage duct and use
a screwdriver to screw the new pump.
6. Install and
screw the water
tray.
Tighten the screws
●Use a screwdriver to screw the
water tray.
4.3 Wall Mounted Type Indoor Unit
Removal of Fan Motor
Remark: before removing, making sure power is disconnected.
Step Diagram Operation Procedure
1
．
Remove the
louver
●Take off the axle bush of the louver.
●Remove the louver.
2
．
Open the front
panel
●Hold the indents on both sides of the
panel and pull it out in the direction
shown by the arrow.
3. Remove the
electrical box
cover 2
●Unscrew the screws fixing the
electrical box cover with a screwdriver.
Take off the box cover 2.
●Detach the ambient temperature
sensor from the conduit.
4. Remove the
front panel
assembly
●Unscrew the screws fixing the front
panel assembly.
●Remove the front panel assembly.