1510P & 1520P
Veris Drive Operating Instructions
Great Plains
| 118-732M | 4/4/19
93
Varying Rates with Pre-set Function
The Great Plains Precision Population Controller allows
you to pre-set three different rates, and then change
rates on-the-go by toggling from one rate to another
rate with the Up or Down arrow keys.
To enter the three pre-set rates:
1.
Press Function key until Pre-set Menu screen
appears.
Refer to Figure 105
2.
Use Up/Down arrow keys to toggle from manual
mode to pre-set mode.
3.
Press Function key to move to the next pre-set
screen, and the Up/Down arrow keys to set the pre-
set rates.
4.
When in Pre-set mode, the main operating screen
shows the pre-set rate currently being applied.
Refer to Figure 106
When you are in Pre-set mode, the Up/Down arrow
keys only toggle between pre-set rates.
Operating Screen using Pre-set rates.
Refer to Figure 107
Figure 105
Pre-set Menu
Figure 106
Figure 107
Operating Screen with Pre-set Rates
