GREAT PLAINS 1510P, Operator'S Manual

Page: 85 / 146

1510P & 1520P Table of Contents Index Veris Drive Operating Instructions
Great Plains | 118-732M | 4/4/19 Table of Contents Index 81
10. Use the Up/Down arrow keys to enter your planned
planting speed.
11. Press Function key to advance to the next window.
Refer to Figure 86

NOTE: Calibration Mode will not accept a speed
more than 10 mph.
12. Use the Up/Down arrow keys to enter the amount of
seed you want to measure.
13. Press Function key to advance to the next window.
Refer to Figure 87
 NOTE: For volumetric measuring, this should be at
least 1/4 of a pound. For singulated metering, at
least 100 seeds should be selected.
The Veris Console Monitor will display in the window the
of the length of time the drive will be operating in order
to meter, based on your selections, to include the
amount of seed you have requested, at the calibration
rate, drill width, and the number of rows you have
selected.
Refer to Figure 88
Figure 86
Figure 87
Figure 88