48
Inside
edge
Outside
edge
Board
Breakwater
Block
of wood
Fixing of the e
dges
PLAYAS
Ref. KWOV637
Fixing of the edges
Fixing of the pla
tes
under the edges
Fixing of th
e corner tri
mmings
PIECE UNDER THE EDGES
• Position the pieces of wood under the edges at the angles and fix
them with 4 screws (4x40).
CORNER TRIMMING
• To improve the aesthetics of the edges, you will
find corner trimmings together with your pool..
• The stainless steel trimmings are fixed by means
of 4 round-head screws (6x30).
EDGES
The edge consists of 2 pieces, an inside one and an outside one.
Check the drawings at the end of this manual.
PREPARATION
• Before fixing the edge, position all the pieces as a trial, checking the installation drawings at the end of the manual, without
screwing them, to uniformly distribute the sets.
• Let the edge overlap towards the inside to create a «breakwater».
FIXING
• You should previously drill the edges with a Ø 4 mm bit for wood to obtain a firm and long-lasting fixing..
Use Ø 4 x 60 mm stainless steel screws for the assembly, these should be obliquely screwed in (in the case of the exterior ones)
to the bottom of the slits.
• When all the edges have been adjusted, continue with levelling the blocks of wood.
Summary of Contents for KWOV436
Page 2: ......