GRE KWOV436, Instruction Manual, Page: 19 / 64

19
Using a mallet, hit the
wooden wedge so it fits
deeply into the boards.
A11
A11
B3
Layout
of the boards
A11
A11
A11
A11
A11
A12
A11
A12
Figure 14
IMPORTANT
It is very important that the boards are correctly installed, above all the bottom ones, (where the water pressure is greater).
There is a possibility of some boards coming loose. This is completely normal because wood is a living material. Even loose, the board
may be installed.
Follow these steps:
• Position and fit one of the two sides of the boards.
• Redirect the other side using a joint closer.
• Fit the board using a mallet and wooden wedge.
Redirected board
Loose board
Look for us in our
YouTube channel to
help you with the
assembly.
• Install the second layer of boards as shown in figure 14.
• There is a wooden wedge in the structure packet to correctly assemble the boards.
• Never directly hit against the boards.. You would damage the pegs and would weaken the
structure.
• Do not hit them with anything metallic. This would inevitably damage the wood.
• Try to correctly assemble the boards right from the start. There should not be any space
between each layer of boards to avoid maladjustment of the higher boards.
2ND LAYER OF BOARDS