30
baguettes sans feutre de paroi
Wooden blocks, reinforcements and trimmings
WOODEN BLOCKS
The position of the wooden blocks and of the reinforcements is indicated in the drawing at the end of the manual.
The wooden ladder can also be used for positioning the wooden blocks, see stepladder chapter.
• Align the upper part of the wooden blocks with the level of the last board. Maintain the wooden blocks in their place.
• Drill the boards with a Ø 6 mm bit for wood.
Tighten the screws in 2 times, from inside the pool.
• First tighten the upper screws into the wooden blocks and the lower ones (in the 1st and 2nd boards).
Systematically check that the upper part of the wooden block.
• Make sure that the head of the screw is level with the surface of the wood.
The wooden blocks are designed to support the edges.
Fix the wooden blocks with
the 6 x 90 screws (1 s
crew
per board)
Align the wooden block with the
upper part of the board.
REINFORCEMENTS
• Align the upper part of the reinforcements with the level of the last board. Maintain the
reinforcements in their place.
• Drill the boards with a Ø 6 mm bit for wood.
Tighten the screws in 2 times, from inside the pool.
• First tighten the upper screws into the reinforcements and then the lower ones (in the 1st and last
boards).
• Check the verticality of the reinforcements.
• Finish assembling the reinforcements using 1 screw per board and correct possible deformations of
the wood (boards). Systematically check that the upper part of the reinforcement is well aligned with
that of the board and that
the head of the screw is level with the surface of the wood.
Check the verticality of the
reinforcements.
Install the reinforcements with
one screw board.
The reinfor
cement nee
d not
necessarily touch th
e ground.
Ref. KWOV637
Ref. KWOV551
Ref. KWOV436
Align the
w o o d e n
blocks and the
reinforcements
with the upper
part of the top board.
Previously
drill the
boards with
a Ø 6 mm bit
for wood to facilitate
the screwing.
Summary of Contents for KWOV436
Page 2: ......