38
• Clean the inside structure of the pool (grains of sand, screws...) use a vacuum cleaner if necessary.
• Check that the skimmer seal is in its place.
• Position the trap door inside the skimmer.
• Check that there are no screw heads protruding above the surface of the wood.
Previous check before installing the liner
Liner
The liner should have been at least 24 hours at a room temperature of at least 20 ºC before being installed.
The dimension of the liner are a few centimetres shorter than the inside dimensions of the pool, so the liner is tensely installed.
The liner should be installed at an external temperature of at least 15 ºC.
We extremely recommend putting the liner in the sun a few hours before assembly, so it is flexible and easy to install.
The sticker with the serial number of the liner should be kept for future reference. This number will be required for any eventual
reclamation against the guarantee.
INSTALLATION
To do this, you should take off your shoes to not damage the liner.
A
Enter the pool, without wearing shoes.
B
Place the liner in the centre of the pool (figure 34) and unfold it starting from there (figure 35)
Uniformly distribute the space between the dimensions of the liner and those the structure all round.
C
Correctly align the lower angles of the liner (angles of the floor closures) with the corners of the pool (figure 36).
D
Insert the hooking profile of the liner into the profile (figure 37).
Figure 37
Figure 36
C
D
The liner
should have
been at least
24 hours at a
room temperature of at
least 20 ºC before being
installed.
The liner should
be installed at an
external temperature
of at least 15 ºC.
If you do not
respect the
instructions
to install the
guarantee will
not apply.
B
Figure 34
Figure 35
Summary of Contents for KWOV436
Page 2: ......