39
E
To move the already installed liner, slide it along the profile.
If this is difficult the liner can be removed by lifting it to not damage it.
Make sure that the liner is well positioned both on the floor as on the walls, uniformly adjust the tension of the same
(with your foot,
push the liner by its angles towards the corners of the walls)
(figure 38).
F
Fill the pool with about two centimetres of water (figure 39).
Figure 39
Figure 38
2 cm of water
to flatten the
floor
F
E
To facilitate installing the liner, this water should not be very cold
G
Flatten the bottom of the liner to avoid folds starting from the centre towards the edges.
Continue filling the pool. If there are still folds, correct the tension of the liner at the walls by sliding it along the hooking profile. (Oblique
folds in the wall indicate incorrect positioning) (Figure 40).
Figure 40
G
This transversal view
shows the liner placed
in the angle
Tense the liner well a
t the
corners.
Una vez colocado el liner, continúe llenando la piscina hasta 10 cm bajo la boquilla de impulsión.
The angles of the liner
should necessarily
correspond to the
corners of the pool
structure.
Some weeks after filling
the pool, the liner will
show a different colour
between the submerged
part and that in the air.
This decolouration is normal and
does not risk the sturdiness and/
or characteristics of the liner.
To avoid that a dark mark
appears due to atmospheric
contamination between the
submerged part and the part of
the liner in the air, (called water
line), we recommend regularly
cleaning the liner in this area a
with a specific cleaner.
Summary of Contents for KWOV436
Page 2: ......