Transmitter description
9
Transmitter description
Transmitter callouts
Antenna
Hovering Pitch Trim (For HELI)
Flap Trim (For AIRPLANE)
Throttle Hold SW (For HELI)
Flap Mixing SW (For AIRPLANE)
Elevator D/R SW
Trainer SW
Elevator Rudder Stick
Elevator Trim
Rudder Trim
On/Off SW
Entry Key
LCD Display
Entry Key
Aileron Trim
Throttle Trim
Throttle (Pitch)
-Aileron Stick
Aileron D/R SW
Flight Mode SW
(for HELI)
Gear SW (for
HELI+AIRPLANE
Throttle Cut SW
Carrying Bar
Hovering Throttle Trim
(for HELI)
Rocker SW
(for AIRPLANE)
Neck Strap
Eyelet
Control stick length adjustment
To adjust the stick lenght, use the 2mm Allen wrench
(supplied with your mx-12 transmitter) to unlock the set
screw. Turn the wrench counterclockwise to loosen the
screw. Then turn the stick clockwise to shorten or coun-
terclockwise to lenghten. After the control stick lenght
has been adjusted to suit your flying style, tighten the
2mm set screw. If you desire longer sticks, GRAUPNER
offers a stick that is approximately one inch longer than
standard. This stick, crafted from bar stock aluminum, is
available at your local GRAUPNER dealer.
Neck strap attachment
An eyelet is provided on the face of the mx-12 transmit-
ter that allows you to connect a Neck Strap. This hook
has been positioned so that your transmitter has the
best possible balance when you use the neck strap.
SET SCREW
TIGHTEN
LOOSEN
