press the
Up
key once again until “H“ is displayed,
and repeat steps 4 and 5.
8. Access the
REVO MX
function by pressing the
Up
key.
9. Access the
THROTTLE CURVE
function by pres-
sing the
Down
key.
10. Exit the
PITCH CURVE
function by pressing the
Down
and
Select
keys simultaneously.
Function mode HELICOPTER
32
Function mode HELICOPTER
Graphic display
Output position
Point
P-LOW : Full Slow position
P-1
: Stick 1/4 position
P-MID : Stick Center position
P-3
: Stick 3/4 position
P-HIGH : Full High position
* Point position is fixed
Hovering Pitch Lever
The Hovering Pitch lever operates in the same manner
as the Hovering Throttle lever. It is only operable while
the flight mode switch is in the NORMAL position, and
its function is to shift the middle portion of the curve
upward or downward.
Example of Throttle Curve and Pitch Curve Settings
An example of throttle curve and pitch curve settings for
aerobatic specifications is shown below in the form of
graphs. Details of the curves will differ depending on the
helicopter specifications. In these examples, the throttle
open-close stroke and autorotation pitch stroke are set 0
to 100 to ease your understanding of other curves.
Throttle
LOW
MID
HIGH
LOW
MID
HIGH
Normal
Hover
Pitch
Throttle
LOW
MID
HIGH
Pitch
LOW
MID
HIGH
Stunt 1
Aerobatics
(INH)
(INH)
LOW
MID
HIGH
Pitch
Throttle
Hold
