System Mode
Model Type Selection; Model Copy Function
System Mode
37
Model Type Selection
The mx-12 is capable of performing as a helicopter or
airplane radio with full functions for each.
Model Number
Model Type Function
Model Name (if programmed)
Modulation
(No display when Model name
displayed)
Go to Model Copy
menu
Go to Model Name
menu
Toggle between
Model Type and
Data Reset
Change model type
selection
Reset Date (when
selected)
Accessing the Type Selection Function
1. While pressing the
Down
and
Select
keys, switch
the transmitter to the ON position to enter the Model
Setup mode.
2. Press either the
Up
or
Down
keys until
MODEL
TYPE
is displayed in the left portion of the LCD.
3. Pressing either the (+) or (-) key will change the type
of model.
4. Press the
Select
key to move the cursor to the
Data Reset position.
5. Press the
Clear
key to reset the memory to the
factory defaults.
6. Press the
Down
key to access the
MODEL NAME
function.
7. Press the
Up
key to access the
MODEL COPY
function.
8. Press the
Down
and
Select
keys simultaneously
to exit the
MODEL TYPE
function.
Model Copy Function
The Copy Selection function enables you to copy all of
the settings of the current model to another model within
the same transmitter. This is very useful when setting
up one aircraft several different ways or when trying an
alternative setup of your current model.
Model Number being programmed
Model number to be copied to
Model Type Function
Accessing the Model Copy Function
1. While pressing the
Down
and
Select
keys, move
the transmitter`s power switch to the On position.
2. Press either the
Up
or
Down
key until
MODEL
COPY
appears on the top left of the LCD.
3. The upper number that appears is the current model.
This is important to note as only the current model
will the copied. Press the (+) or (-) keys to select the
desired program (lower number) to copy the current
model to.
4. Next, press the
Clear
key. The current model will
then be copied to the selected model.
Note:
Always make sure that the accepting model is
either free of input or one which you no lon
ger want to retain in your transmitter`s me
mory. Once the copying process has been
completed,the information of the accepting
model is lost and the current model is input as
the new data.
5. Press the
Up
key to access the
MODULATION
function.
6. Press the
Down
key to access the
MODEL TYPE
function.
7. Press the
Down
and
Select
keys simultaneously
to exit the
MODEL COPY
function.
Go to Model Copy
menu
Go to Model Type
menu
Change model to
copy to
Perform copy
function
