GRAUPNER Falcon 12 Manual Download Page 6

Page: 6 / 52

6 / 52

S1019_S1034_S1035_33579_33583_FW2_DE_V1.0sh

Introduction

Thank you very much for purchasing a

Graupner receiver with 3-axis

gyro of the type Falcon 12 (plus), GR-18 HoTT or GR-24 PRO HoTT.

Read the manual carefully to use the receiver optimally und first of

all to safely control your models. If you experience any trouble during

operation, take the instructions to help or ask your dealer or

Graupner

Service Centre.

Due to technical changes, the information may be changed in this

manual without prior notice. Be always updated by checking period-

ically on our website,

www.graupner.de

to be always uptodate with

the products and firmwares.
This product complies with national and European legal require-

ments.
To maintain this condition and to ensure safe operation, you must

read and follow this user manual and the safety notes before using

the product!

Note

This manual is part of that product. It contains important informa-

tion concerning operation and handling. Keep these instructions for

future reference and give it to third person in case you gave the

product.

Service centre

Graupner Central Service

Graupner GmbH

Henriettenstrasse 96

D-73230 Kirchheim / Teck

Servicehotline

(+49) (0)7021/722-130

Monday - Thursday:

9:15 am - 4:00 pm

Friday:

9:15 am - 1:00 pm



[email protected]

Graupner USA
3941 Park Dr Suite 20-571
El Dorado Hills, CA 95762

Website: www.graupnerusa.com
Phone: +1 855-572-4746
Email:[email protected]

Graupner in Internet

For the service centers outside Germany please refer to our web site

www.graupner.de

Summary of Contents for Falcon 12





















































Search results

Summary of Contents for Falcon 12

Reviews:

Related manuals for Falcon 12

Brands by name

Popular brands

GRAUPNER Falcon 12, Manual

Search results

Summary of Contents for Falcon 12

Reviews:

Related manuals for Falcon 12

Brands by name

Popular brands