manualshive.com logo in svg

GRAUPNER Falcon 12, Manual

Share
Download
GRAUPNER Falcon 12 Manual Download Page 16

16 / 52

S1019_S1034_S1035_33579_33583_FW2_DE_V1.0sh

Gyro initialization before starting the flight operation

Each time the receiver system is switched on, the gyro system and 

possibly also the vario of the receiver require approx. 2 seconds for 

initialization. During this period, the model must not be moved.

Initialization of the gyro step-by-step

1.  Switch on transmitter.
2.  Move or hold the sticks in neutral position.
3.  Switch on the receiver system of the model.

The gyro immediately becomes active but still needs to be ini-

tialised.

4.  Do not move the model. 
5.  After approx. 2 seconds in still position, the ailerons move briefly 

in both directions. 
These "wiggles" indicates that initialization has been successful.

6.  The calibration is completed successfully. 

The model can be moved.

Notes

•  During initialization, the receiver determines the neutral posi-

tion, for this reason it is imperative that the model is not moved 

during activation!

•  During the gyro initialization also the central position of each 

control channel is saved. By gyro suppression the gyro correc-

tion is reduced with increasing control deflection, at +/-100% of 

the gyro is deactivated.

Summary of Contents for Falcon 12





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands