179
XIP
-
3901
User Manual
Deglitcher Tab
For each processing channel, select the appropriate deglitcher mode (ON or OFF) using the
pulldown menu.
The XIP
-
3901
-
UDC
-
IF’s
Input/Output
Panel,
Deglitcher
tab configuration is the same as the
XIP
-
3901
-
UC / -DC / -FS’s
Video
Input/Output
Panel,
Timing
tab configuration; see
De-interlacer Tab
Each processing channel has its own de-interlacer used during interlaced sources. The Film
Mode and Video Over Film settings can either be set to
On
or
Off
. By default, both are set to
On
for optimal performance.
The XIP
-
3901
-
UDC
-
IF’s
Input/Output
Panel,
De-interlacer
tab configuration is the same as
the XIP
-
3901
-
UDC
-
IP’s
Video
Panel,
De-interlacer
Detail Enhancer Tab
The Detail Enhancer allows you to apply a level of enhancement to the signal to regain lost
detail or to simply create a sharper image. Horizontal and Vertical slide controllers allow
you to adjust the magnitude of the enhancer to be set both horizontal and vertical
directions. These controls only work after down-scaling of video resolution. For example,
2160p to 1080p or 1080i for instance.
The XIP
-
3901
-
UDC
-
IF’s
Input/Output
Panel,
Detail Enhancer
tab configuration is the same
as the XIP
-
3901
-
UDC
-
IP’s
Video
Panel,
Detail Enhancer
Video Proc Tab
The Video Proc controls allow you to apply a correction to the individual signal components
of the Y’CrCb color space. This follows the input colorimetry of the one selected in the HDR
panel.
The XIP
-
3901
-
UDC
-
IF’s
Input/Output
Panel,
Video Proc
tab configuration is the same as the
XIP
-
3901
-
UDC
-
IP’s
Video
Panel,
Video Proc
tab configuration; see
Color Corrector Tab
The Color Corrector controls allow you to apply correction to the individual primary RGB
channels.
The XIP
-
3901
-
UDC
-
IF’s
Input/Output
Panel,
Color Corrector
tab configuration is the same
as the XIP
-
3901
-
UDC
-
IP’s
Video
Panel,
Color Corrector
Summary of Contents for XIP-3901
