GRASS VALLEY XIP-3901, User Manual

Page: 213 / 308

213
10
Configuring the XIP - 3901 - GB - IP
Application with iControl
This section describes the control panels associated with the XIP - 3901 - GB - IP application
and its use.
Network Panel
The Network panel is used to set the network configuration of the media and control
Ethernet ports on the XIP - 3901 - GB - IP.
The XIP - 3901 - GB - IP’s Network Panel configuration is the same as the XIP - 3901 - UDC - IP’s
Network Panel configuration, including all tabs; see Network Panel , on page 115.
PTP Panel
To allow vertically accurate video frame synchronization, multicast Precision Timing
Protocol (described in IEEE Standard 1588) is used to distribute time across a packet
network. It is used on both media ports (ETH1 and ETH2) for BMCA redundancy. This
supports Best Master Clock Algorithm (BMCA) as per IEEE-1588-2008.
The XIP
- 3901 - GB - IP’s
PTP
Panel configuration is the same as the XIP - 3901 - UDC - IP’s
PTP
Panel configuration; see PTP Panel , on page 121.
NMOS Panel
XIP - 3901 - GB - IP supports Networked Media Open Specifications (NMOS) AMWA IS-04 for
device discovery and registration and IS-05 for connection management. Furthermore, it
supports AMWA BCP-002 recommendations for Grouping NMOS Resources.
The XIP
- 3901 - GB - IP’s NMOS Panel configuration is the same as the XIP - 3901 - UDC - IP’s
NMOS Panel configuration; see NMOS Panel , on page 123.
Receivers Panel
The Receivers panel has two tabs ( GB1 and GB2 ); one for each of XIP - 3901 - GB - IP’s
independent processing channels. The configuration of the GB2 tab is the same as the GB1
tab. Only the configuration of the GB1 tab is shown below.
XIP - 3901 - UC,
XIP - 3901 - DC, or
XIP - 3901 - FS XIP - 3901 - UDC-IP XIP - 3901 - UDC-IF XIP - 3901 - GB-IP XIP - 3901 - JPEG XS
