GRASS VALLEY XIP-3901, User Manual

Page: 153 / 308

153
XIP - 3901
User Manual
Property Description
Metadata
DID (HEX)
SDID (HEX) Use any of the eight pulldowns to select the metadata you want to pass or block. You can
select any predefined Metadata and the card will manage DID and SDID for you:
• Time Code: DID/SDID = 60h/60h. When set to Process mode, this activates the
controls under the
Timecode
tab at the bottom of the panel.
• Closed Captioning EIA-708-B: DID/SDID = 61h/01h
• Closed Captioning EIA-608-B: DID/SDID = 61h/02h
• Teletext OP-47: DID/SDID = 43h/02h
• AFD: DID/SDID = 41h/05h
• SCTE 104: DID/SDID = 41h/07h
• Audio Metadata 01: DID/SDID = 45h/01h
• Audio Metadata 02: DID/SDID = 45h/02h
• Audio Metadata 03: DID/SDID = 45h/03h
• Audio Metadata 04: DID/SDID = 45h/04h
• Audio Metadata 05: DID/SDID = 45h/05h
• Audio Metadata 06: DID/SDID = 45h/06h
• Audio Metadata 07: DID/SDID = 45h/07h
• Audio Metadata 08: DID/SDID = 45h/08h
• Audio Metadata 09: DID/SDID = 45h/09h
• Custom: you can specify a custom metadata by specifying DID and SDID.
You cannot set the same metadata twice based on DID and SDID.
Presence Shows if the selected metadata type has been detected. The status indicator shows the
current metadata status:
Green: the selected metadata is present.
Grey: the selected metadata is not present.
Insertion Set whether the detected ancillary packet is to be inserted into the card’s output:
Pass:
allow the detected ancillary packet is to be passed through the card.
Block: drop the detected ancillary packet from being passed through the card.
Process: When Timecode is set to Process mode, this activates the controls under the
Timecode tab at the bottom of the panel.
Apply
Cancel When active, this applies or rejects your current changes made in this tab.